Cisco Cisco TelePresence Video Communication Server Expressway
Optional Configuration Tasks
Task 15: Configuring Cisco TMS (Optional)
The following configuration enables the VCS system to be integrated to a Cisco TelePresence Management Suite
(Cisco TMS).
(Cisco TMS).
Points to note:
■
Further configuration tasks are also required on Cisco TMS to fully integrate the VCS with the TMS server. For
details, see Cisco TMS Administrator Guide on the
details, see Cisco TMS Administrator Guide on the
■
Enabling SNMP speeds up the VCS - TMS integration process, but is not essential.
■
VCS Expressway integration with TMS requires additional firewall / NAT configuration. VCS Expressway needs
to access port 80/443 on Cisco TMS from outside the firewall. See
to access port 80/443 on Cisco TMS from outside the firewall. See
.
To enable and configure SNMP:
1.
Go to System > SNMP.
2.
Configure the SNMP fields as follows:
VCS Control
VCS Expressway
SNMP mode
v3 plus TMS support
Same as VCS Control
Community name
Check that it is public
System contact
Enter IT administrator
Location
Enter example.com head office
Username
Enter VCS
Authentication mode
On
Type
SHA
Password
Enter ex4mpl3.c0m
Privacy mode
On
Type
AES
Password
Enter ex4mpl3.c0m
3.
Click Save.
42
Cisco VCS Expressway and VCS Control - Basic Configuration Deployment Guide
Optional Configuration Tasks