Cisco Cisco TelePresence Video Communication Server Expressway
Task 9: Configuring the Traversal Zone
The traversal zone configuration defines a connection between the VCS Control and VCS Expressway platforms.
■
A traversal zone connection allows firewall traversal for signaling and media between the two platforms.
■
The VCS Control is configured with a traversal client zone, and the VCS Expressway with a traversal server zone.
To configure the traversal zone:
1.
Go to Configuration > Zones > Zones.
2.
Click New.
3.
Configure the fields as follows (leave all other fields with default values):
VCS Control
VCS Expressway
Name
Enter Traversal zone
Enter Traversal zone
Type
Traversal client
Traversal server
Username
Enter exampleauth
Enter exampleauth
Password
Enter ex4mpl3.c0m
Not applicable
H.323 Mode
On
On
H.323 Protocol
Assent
Assent
H.323 Port
Enter 6001
Enter 6001
H.323 H.460.19 demultiplexing mode
Not applicable
Off
SIP Mode
On
On
SIP Port
Enter 7001
Enter 7001
SIP Transport
TLS
TLS
SIP TLS verify mode
Off
Off
SIP Accept proxied registrations
Allow
Allow
Location Peer 1 address
Enter 192.0.2.2
Not applicable
4.
Click Create zone.
18
Cisco VCS Expressway and VCS Control - Basic Configuration Deployment Guide