Cisco Cisco TelePresence Video Communication Server Expressway
3. Configure the fields as follows:
VCS Control
VCS Expressway
Name
Not applicable
Enter exampleauth
Password
Not applicable
Enter ex4mpl3.c0m
4. Click Create credential.
Configuring traversal zones for Unified Communications
To support Unified Communications features such as mobile and remote access or Jabber Guest, there must
be a secure traversal zone connection between the VCS Control and the VCS Expressway:
be a secure traversal zone connection between the VCS Control and the VCS Expressway:
n
The VCS Control and VCS Expressway must be configured with a zone of type Unified Communications
traversal. This automatically configures an appropriate traversal zone (a traversal client zone when
selected on a VCS Control, or a traversal server zone when selected on a VCS Expressway) that uses SIP
TLS with TLS verify mode set to On, and Media encryption mode set to Force encrypted.
traversal. This automatically configures an appropriate traversal zone (a traversal client zone when
selected on a VCS Control, or a traversal server zone when selected on a VCS Expressway) that uses SIP
TLS with TLS verify mode set to On, and Media encryption mode set to Force encrypted.
n
Both VCSs must trust each other's server certificate. As each VCS acts both as a client and as a server
you must ensure that each VCS’s certificate is valid both as a client and as a server.
you must ensure that each VCS’s certificate is valid both as a client and as a server.
n
If an H.323 or a non-encrypted connection is also required, a separate pair of traversal zones must be
configured.
configured.
Task 10: Configuring traversal zone search rules
To create the search rules to route calls via the traversal zone.
1. Go to
Configuration > Dial plan > Search rules
.
2. Click New.
Cisco TelePresence Video Communication Server Basic Configuration (Control with Expressway) Deploy-
ment Guide (X8.2)
ment Guide (X8.2)
Page 24 of 65
Routing configuration