Cisco Cisco TelePresence Video Communication Server Expressway
3. Configure the fields as follows:
VCS Control
VCS Expressway
Name
Not applicable
Enter exampleauth
Password
Not applicable
Enter ex4mpl3.c0m
4. Click Create credential.
Configuring traversal zones for Unified Communications
To support Unified Communications features such as mobile and remote access or Jabber Guest, there must
be a secure traversal zone connection between the VCS Control and the VCS Expressway:
be a secure traversal zone connection between the VCS Control and the VCS Expressway:
n
The traversal client zone and the traversal server zone must be configured to use SIP TLS with TLS verify
mode set to On, and Media encryption mode must be Force encrypted.
mode set to On, and Media encryption mode must be Force encrypted.
n
Both VCSs must trust each other's server certificate. As each VCS acts both as a client and as a server
you must ensure that each VCS’s certificate is valid both as a client and as a server.
you must ensure that each VCS’s certificate is valid both as a client and as a server.
n
If a H.323 or a non-encrypted connection is required, a separate pair of traversal zones must be configured.
Task 10: Configuring traversal zone search rules
To create the search rules to route calls via the traversal zone.
1. Go to
Configuration > Dial plan > Search rules
.
2. Click New.
Cisco VCS Basic Configuration (Control with Expressway) Deployment Guide
Page 24 of 65
Routing configuration