Cisco Cisco TelePresence Video Communication Server Expressway
Cisco VCS system configuration
Cisco VCS Basic Configuration (Single VCS Control) Deployment Guide
Page 7 of 32
Step 2: System name configuration
The System name defines the name of the VCS.
The System name appears in various places in the web interface, and in the display on the front panel of the
unit (so that you can identify it when it is in a rack with other systems). The system name is also used by
Cisco TMS.
unit (so that you can identify it when it is in a rack with other systems). The system name is also used by
Cisco TMS.
You are recommended to give the VCS a name that allows you to easily and uniquely identify it. If the system
name is longer than 16 characters, only the last 16 characters will be shown in the display on the front panel.
name is longer than 16 characters, only the last 16 characters will be shown in the display on the front panel.
To configure the System name:
1. Go to the
System administration
page (
System > System
).
2. Configure the System name as follows:
System name
Enter VCSc
3. Click Save.