Cisco Cisco TelePresence Video Communication Server Expressway

Getting started 

After the basic network parameters have been configured (and as long as the network access policy 
permits it) the Cisco VCS web interface (login screen) should be reachable using a web browser — 
after entering the Cisco VCS’s IP address (or FQDN) into the browser’s address bar, the Web 
interface login screen should be displayed. 

Note: This deployment guide is based on configuration using the web interface. If you cannot access 
the Cisco VCS using the web interface after completing the initial configuration (assigning the IP 
address), speak to your network administrator. 

To log in to the Cisco VCS using the web interface: 
1.  Enter the IP address of the Cisco VCS into the web browser’s address bar.  

The Cisco VCS web interface login screen should be displayed in the browser. 

2. Click 

Administrator login. 

3.  Enter the following (default) access credentials: 

 

admin 

TANDBERG 

 

4. Click 

Login. 

The Cisco VCS Overview page should be displayed. 

Note: Next to each configuration parameter on the web interface there is an information icon  . 
Clicking the icon opens an information box in the browser containing information, usage notes and 
the default value of the related parameter. 

Refer to “Web interface” in the “Using the Cisco VCS” section of the Cisco VCS Administrator Guide 
for more details regarding using the web interface. 

 

Cisco VCS Deployment Guide: Single Cisco VCS Control – Basic Configuration 

Page 7 of 27