Cisco Cisco TelePresence Video Communication Server Expressway
Appendix 5 – Configuring endpoints to work with a Cisco VCS cluster
Cisco VCS Deployment Guide: Cluster creation and maintenance (Cisco VCS X6.1)
Page 52 of 68
Option 4 – Static IP (least preferred)
Use this option if the Cisco VCS cluster does not have a DNS name.
On each SIP endpoint configure the SIP Settings as:
Server discovery = Manual
Server Address = IP address of a Cisco VCS peer
On startup the endpoint will try and register with the Cisco VCS at the specified IP address. If that is
not available, then the endpoint will continue trying at regular intervals.
not available, then the endpoint will continue trying at regular intervals.
This will be repeated until the endpoint can register with the Cisco VCS.
The endpoint will continue to use the first Cisco VCS that it registered to for re-registrations and for
calls. If it ever loses connection then it will keep on trying to register to that Cisco VCS until it is
accessible again.
calls. If it ever loses connection then it will keep on trying to register to that Cisco VCS until it is
accessible again.