Cisco Cisco TelePresence Video Communication Server Expressway
In this example, the search rule filters requests to the ENUM zone so that it is only queried for certain digit
strings. A transform is also applied to remove any domain that may have been added by a SIP device or by a
transform in the VCS to make E164 numbers into URIs.
strings. A transform is also applied to remove any domain that may have been added by a SIP device or by a
transform in the VCS to make E164 numbers into URIs.
The above configuration means that when a call is made to 557123 or 557123@vcs.domain then this ENUM
zone will perform a lookup of NAPTR records at: 3.2.1.7.5.5.enum.search.com
zone will perform a lookup of NAPTR records at: 3.2.1.7.5.5.enum.search.com
Configuring the VCS with a DNS server
For the VCS to perform a DNS query for an ENUM zone, it must be configured with at least one DNS server
that can resolve the query for the DNS location where the NAPTR records for that particular ENUM lookup
are held.
that can resolve the query for the DNS location where the NAPTR records for that particular ENUM lookup
are held.
To configure the VCS with details of a DNS server to use:
1. Go to
System > DNS
.
2. In one of the available Address fields, enter the IP address of the DNS server that will be used to resolve
the NAPTR query. This could be:
l
an internal DNS server that holds the NAPTR records – for example, use this if you are implementing
ENUM dialing for calls within your network only
ENUM dialing for calls within your network only
l
an internal DNS server that directs the query to an external DNS server
l
an external DNS server
Cisco TelePresence ENUM Dialing on Cisco VCS Deployment Guide (X8.2)
Page 6 of 12
Configuring the VCS