Cisco Cisco UCS C22 M3 Rack Server 문제 해결 가이드
UCS C−Series Rack Servers CLI Commands for
Troubleshooting HDD Issues
Troubleshooting HDD Issues
Document ID: 115025
Contributed by Andreas Nikas, Cisco TAC Engineer.
Dec 07, 2012
Dec 07, 2012
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
CLI Commands
Show the Product Name
Show the HDD Status
Show the Virtual and Physical Drive Status
Show the Number of Correctable and Uncorrectable Errors
Show the RAID Controller Configuration
Show the Number of HDDs
Technical Support File
Battery Backup Unit
Related Information
Prerequisites
Requirements
Components Used
Conventions
CLI Commands
Show the Product Name
Show the HDD Status
Show the Virtual and Physical Drive Status
Show the Number of Correctable and Uncorrectable Errors
Show the RAID Controller Configuration
Show the Number of HDDs
Technical Support File
Battery Backup Unit
Related Information
Introduction
This document describes several command−line interface (CLI) commands, as well as other troubleshooting
techniques, that can help troubleshoot hard disk drive (HDD) issues. The best method for troubleshooting
HDD issues is to use the LEDs, GUI, BIOS, LSI Option ROM / MegaRaid GUI, and logs. However, these
options are not always available. In this case, you can use the CLI.
techniques, that can help troubleshoot hard disk drive (HDD) issues. The best method for troubleshooting
HDD issues is to use the LEDs, GUI, BIOS, LSI Option ROM / MegaRaid GUI, and logs. However, these
options are not always available. In this case, you can use the CLI.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.