Cisco Cisco DWDM Transceiver Modules 설치 가이드
Corporate Headquarters:
© 2006–2009 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Enhanced Wave Division Multiplexing
Optical System Installation Note
Optical System Installation Note
This document provides installation instructions for the Cisco Enhanced Wave Division Multiplexer
(EWDM) passive optical system. The EWDM system combines 1 GB Coarse Wave Division
Multiplexing (CWDM) connections using SFPs and GBICs with 10 GB Dense Wave Division
Multiplexing (DWDM) connections using XENPAK, X2, or XFP DWDM modules. These DWDM
connections can either be passive or boosted to allow a longer range for the connection. The EWDM
passive optical system product numbers are listed in
(EWDM) passive optical system. The EWDM system combines 1 GB Coarse Wave Division
Multiplexing (CWDM) connections using SFPs and GBICs with 10 GB Dense Wave Division
Multiplexing (DWDM) connections using XENPAK, X2, or XFP DWDM modules. These DWDM
connections can either be passive or boosted to allow a longer range for the connection. The EWDM
passive optical system product numbers are listed in
.
Table 1
EWDM Passive Optical System Product Numbers
Product Number
Description
CWDM-CHASSIS-2=
two-slot chassis, 1 Rack Unit
EWDM-MUX8=
8-channel MUX/DEMUX module
EWDM-OADM4=
Four-channel Optical Add/Drop Multiplexer
(OADM) module
(OADM) module
EWDM-OADM2=
2-channel OADM module
EWDM-OA=
DWDM booster amplifier
CAB-SM-LCSC-1M=
LC to SC connector cable, 1 m
CAB-SM-LCSC-5M=
LC to SC connector cable, 5 m