Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cisco VCS
Configuring the Cisco VCS
Configuring an ENUM zone and search rule
An ENUM zone on the Cisco VCS and its associated search rule are used to construct a query for a
DNS server with NAPTR records that describe how to convert E.164 numbers into one or more URIs.
DNS server with NAPTR records that describe how to convert E.164 numbers into one or more URIs.
In this deployment scenario, we want to query DNS for NAPTR records based on the number that was
dialed, ignoring any domain information that has been appended. This requires
dialed, ignoring any domain information that has been appended. This requires
an ENUM zone configured with a DNS domain suffix to be used for the lookup
a search rule that transforms incoming dialed aliases into digit only numbers
To configure an ENUM zone:
1. Go to the Zones page (VCS configuration > Zones).
2. Click
New. You are taken to the Create zone page.
3. Configure the fields as follows:
Name
Enter the name you want to give this zone, for example “ENUM lookup zone”
Type
Select ENUM
Hop count
Leave as default setting
DNS suffix
Enter the suffix of the DNS location where the NAPTR records for this ENUM
lookup are held, for example enum.search.com
lookup are held, for example enum.search.com
H.323 mode
Select On if the result of the ENUM lookup is allowed to be used to generate
an H.323 call
an H.323 call
SIP mode
Select On if the result of the ENUM lookup is allowed to be used to generate a
SIP call
SIP call
4. Click
Create zone.
To configure a search rule:
1. Go to the Search rules page (VCS configuration > Search rules > Rules).
2. Click
New. You are taken to the Create search rule page.
3. Configure the fields as follows:
Rule name
Enter a name for the rule, for example “ENUM lookup”
Cisco VCS Deployment Guide: ENUM dialing on Cisco VCS (X5.1)
Page 4 of 11