Cisco Cisco HDT Network Storage Hard Drive Trays 관리자 가이드
Managing the NSS
Changing the Administrator Password
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
147
7
the UPS, 5) the NSS loses contact with the UPS (after communication was
successfully established), 6) the UPS is about to shut down the system, 7)
the UPS battery needs to be replaced, 8) the NSS cannot talk to the UPS.
successfully established), 6) the UPS is about to shut down the system, 7)
the UPS battery needs to be replaced, 8) the NSS cannot talk to the UPS.
STEP 6
Click Add.
The management station appears in the Existing SNMP Trapsinks list.
STEP 7
Repeat steps 4 through 6 for each SNMP server address to which you want to
send alerts.
send alerts.
STEP 8
To send a test alert for each of the selected conditions to all configured trapsinks,
click Test All. To delete an existing SNMP Trapsink, click Delete.
click Test All. To delete an existing SNMP Trapsink, click Delete.
Changing the Administrator Password
You should change the administrator password from the default to ensure that only
authorized individuals can access the NSS configuration interface. If you forget the
administrator password, you can only reset it by pressing the Reset button on the
NSS chassis and restoring the factory defaults. The default password is “admin.”
authorized individuals can access the NSS configuration interface. If you forget the
administrator password, you can only reset it by pressing the Reset button on the
NSS chassis and restoring the factory defaults. The default password is “admin.”
To set up the administrator password:
STEP 1
From the Manager Menu, click Admin
Password.
The Admin Password Configuration page appears.