Cisco Cisco HDT Network Storage Hard Drive Trays 관리자 가이드

Virtualizing Storage within your Network

Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide

49

You can install the drives into the new NSS in any order. You do not need to install 
them in the same order or slots that they were installed in the original NSS.

When all the disk drives are installed, power up the NSS.

The NSS virtualization feature lets you create storage physically located on other 
network NSS units into one logical storage unit. The recommended network 
configuration for using virtualization is to use an NSS6000 series to operate as the 
“master” storage device (the “slave” devices can either be NSS6000, NSS4000, 
NSS3000, or NSS2000 series devices). This configuration setup means that you 
can export storage (must be an unused disk drive or configured array) from a slave 
NSS and then import the storage into the master NSS. The supported RAID level 
for virtualized storage is JBOD (although the JBOD can consist of concatenated 
exported arrays).

After you configure a virtual RAID, you cannot migrate the disks used for that RAID 
to another NSS. You also cannot export storage from a device that uses 
imported storage.