Cisco Cisco TelePresence Video Communication Server Expressway
Setting up communication between Cisco TMS and Cisco
VCS
VCS
Perform this procedure to enable the Cisco VCS or VCS clusters to communicate with Cisco TMSPE. If
Cisco VCSs are clustered, configure only one Cisco VCS in the cluster.
Cisco VCSs are clustered, configure only one Cisco VCS in the cluster.
n
Cisco VCS imports the user configurations, FindMe settings, phone books and licensing information from
Cisco TMSPE.
Cisco TMSPE.
n
Cisco TMSPE receives information about provisioned devices from Cisco VCS.
Follow these steps:
1. In Cisco TMS, go to
Systems > Navigator
and select the Cisco VCS. This can be any Cisco VCS from
the cluster.
2. Click the
Provisioning
tab.
3. At the bottom of the page, click the Set Default Connection Settings button.
The
Cisco TMS Connection Settings
pane is populated with suggested values.
4. Adjust the connection settings according to your telepresence infrastructure.
l
. If
opting not to use secure communication, make sure to change this setting to Off, or the connection will
be refused. If enabling encryption, also select whether to check for a valid certificate and certificate
hostname.
be refused. If enabling encryption, also select whether to check for a valid certificate and certificate
hostname.
l
The username and password must be for a member of the Site Administrators group in Cisco TMS.
5. Scroll down to the
Services
pane and check Enable Service for each of the services listed, including
FindMe if applicable.
6. Click Save.
7. Check the Status field for each of the enabled services. If errors are displayed for any of the services,
click the corresponding warning icon and follow the instructions displayed. Then click Force Refresh.
Cisco TMSPE Provisioning Deployment Guide
Page 20 of 78
Installing Cisco TMSPE
Setting up communication between Cisco TMS and Cisco VCS