Cisco Cisco Unified MeetingPlace 7.0 빠른 설정 가이드
Configuring Endpoints for Cisco Unified MeetingPlace
How to Configure Auto-Answer Devices
7
Related Topics
•
in the
module
•
module
How to Configure Auto-Answer Devices
Auto-answer devices are audio or video endpoints that are incapable of entering the dual-tone
multi-frequency (DTMF) signals that are required to use the telephone user interface (TUI). Many
auto-answer devices automatically answer calls even when people are not present or using the device.
multi-frequency (DTMF) signals that are required to use the telephone user interface (TUI). Many
auto-answer devices automatically answer calls even when people are not present or using the device.
•
•
Configuring User Profiles for Auto-Answer Devices
To specify a user profile as an auto-answer device, enter the following exact text in the
user
profile field: autoanswerdevice
Related Topics
•
in the
module
•
Modifying When the System Disconnects Auto-Answer Devices from Meetings
To prevent auto-answer devices from wasting system resources, Cisco Unified MeetingPlace
automatically disconnects auto-answer devices from meetings. Perform one of the following procedures
to modify when auto-answer devices are disconnected from meetings.
automatically disconnects auto-answer devices from meetings. Perform one of the following procedures
to modify when auto-answer devices are disconnected from meetings.
Procedure for Release 7.0.2
Step 1
Log in to the Administration Center.
Step 2
Select System Configuration > Meeting Configuration.
Step 3
Configure the following fields:
•
—If your Cisco Unified MeetingPlace system is integrated with
Cisco WebEx, then set this field to Yes. Otherwise, the Cisco WebEx audio recorder will not work.
•
•
—Set this field to Yes if the previous two
fields are also set to Yes. Otherwise, the system will never automatically disconnect auto-answer
devices from continuous meetings.
devices from continuous meetings.