Cisco Cisco IPICS Release 1.0 기술 매뉴얼
Click ok when done.
In order to program these changes to the fixed station, it needs to be put in standby mode. Click the
“Standby” icon on the toolbar, followed by the “Program” icon. When programming is complete, click on
the “Run” icon to bring the fixed station back to an operational state.
“Standby” icon on the toolbar, followed by the “Program” icon. When programming is complete, click on
the “Run” icon to bring the fixed station back to an operational state.
Daniels Fixed Stations
(Coming Soon)
DFSIG & Fixed Station Descriptors
Before a DFSIG or fixed station is provisioned within the IPICS Server, a descriptor needs to be created
for the DFSIG and one or more for the fixed stations. The fixed station descriptor(s) describes channels
programmed on the fixed station(s) and the control functions that are needed by a dispatcher.
for the DFSIG and one or more for the fixed stations. The fixed station descriptor(s) describes channels
programmed on the fixed station(s) and the control functions that are needed by a dispatcher.
An example DFSIG descriptor is available on the IPICS Server in Configuration > Descriptors. Below is an
explanation of the format of the descriptors (XML file).
explanation of the format of the descriptors (XML file).