Cisco Cisco ScanSafe Web Security
Cisco CWS
– AnyConnect Web Security Deployment Guide
21
Test
Deploy
Prepare
Step 12:
To verify AnyConnect Web Security has correctly identified the logged on user, browse to
. Note the user name and group memberships.
Install AnyConnect Web Security using the pre-deploy method for Mac
Cisco defines the pre-
deploy method as a “network push.” However, in this tutorial, we will be
installing AnyConnect Web Security locally. This will demonstrate how to configure an AnyConnect
disk image before deployment. Once the disk image is configured, a software management solution
may be used to push AnyConnect Web Security to an OS X client. Pre-deploy does not require the
AnyConnect VPN to be installed. An administrator account is required to install AnyConnect Web
Security.
disk image before deployment. Once the disk image is configured, a software management solution
may be used to push AnyConnect Web Security to an OS X client. Pre-deploy does not require the
AnyConnect VPN to be installed. An administrator account is required to install AnyConnect Web
Security.
Reference video:
Be sure to have the following before you begin:
o AnyConnect Web Security service profile
o AnyConnect Mac pre-deploy disk image. This can be obtained from
Delivery Manager
o VPN disable service profile (VPNDisable_ServiceProfile.xml). This can be obtained from
your Service Delivery Manager, or in the appendix at the end of this document
o MacBook
Step 1:
Log on to a Mac and download the AnyConnect Web Security disk image along with the VPN
disable service profile. Copy the web security service profile to the desktop.
*Note: You must configure the AnyConnect Web Security disk image before installing AnyConnect
Web Security.
Web Security.
Step 2:
Run Disk Utility. Select the disk image file. Click Convert.
Step 3:
Save the name with an “rw” for re-write.
Figure 2.18