SINGER SE340 LEGACY 지침 매뉴얼

49

Before you begin embroidering, you can edit designs, as 

shown below, using the Edit Tabs.

NOTE:

A pop up message may appear if you did not attach the correct 

hoop.

3UHVV³✓´EXWWRQDQGDWWDFKWKHKRRSLQGLFDWHGLQWKLVPHVVDJH

or change hoop size setting at the Embroidery Option screen 

1H[WSDJH

1. Press the embroidery rotate and mirroring tab.

2. Press the Rotate button. By pressing this button, the design

will rotate 90 degrees clockwise. If the design is too wide or

too high to rotate 90 degrees, it will rotate 180 degrees.

The total rotation value will be indicated at the top right of

the LCD screen.  Located to the left of the rotation value is

DµPDFKLQHLFRQ¶ZKLFKZLOOURWDWHDVWKHURWDWLRQYDOXHLV

changed.

3. Press the Mirror buttons.

a. Mirror from top to bottom

b. Mirror from side to side

 7KHµPDFKLQHLFRQ¶ORFDWHGQHDUWKHWRSRIWKH/&'VFUHHQ

will change to the selections made, indicating the new 

orientation of the embroidery design.

<RXFDQPRYHWKHSODFHPHQWRUSRVLWLRQRIWKHVHOHFWHG

embroidery design, as follows:

1. Press the Embroidery Placement tab.

 :KHQ\RXKDYHVHOHFWHGWKHGHVLJQWKLVVFUHHQZLOO

DSSHDU¿UVW

2. Press the four arrow buttons to move the position.

a: up,  b: left, c: right, d: down

The hoop will move according to the direction selected.

Each time the button is touched, the hoop will move. If the

button is touched and held, the movement will be done in

larger increments.

 7KHYDOXHV;<QHDUWKHWRSRIWKHVFUHHQLQGLFDWH

distance from center position.

NOTE:

The left side of screen is showing the embroidery area and 

relative design position and size.

:KHQ\RXHGLWWKHGHVLJQWKLV¿HOGZLOOUHGUDZDFFRUGLQJWR

your editing. 

 3UHVVWKH(PEURLGHU\6FDOLQJWDE

 7RLQFUHDVHWKHVFDOHSUHVVWKHXSSHUDUURZEXWWRQD

 7RGHFUHDVHWKHVFDOHSUHVVWKHORZHUDUURZEXWWRQE

The design will be scaled 5 percent each pressing on a 

button.

The maximum scaling is +/- 20 percent.

If scaling is exceeding the hoop size, it cannot be selected.

 7RUHWXUQWRRULJLQDOVL]HSUHVVWKHEXWWRQF

The value of the current  scale is indicated between the 

buttons, and size of scaled design is indicated on the top 

line of screen.