Cisco Cisco Videoscape Voyager Vantage 3.2 사용자 가이드
117
Home Networking Diagnostics
MoCA Node Power Level Table Screen
MoCA Node Power Level Table Screen
Tasks that you can perform from this screen include the following:
Determine the receive level from the other nodes in the netowrk to the local node.
Determine the path loss from each node to the local node.
MoCA Node Statistics Table Screen
Tasks that you can perform from this screen include the following:
Determine the transmit and receive bit rates and path margins for each local node in the network.
Table 3
MoCA Node Rate Table
Field Name
Description
Possible Values
Unicast PHY Rate
Transmit rate from the local node to
every other node in the network (in
Mb/s).
every other node in the network (in
Mb/s).
[Integer > 0]
Brdcst PHY Rate
Data rate used for packets broadcast
to all other nodes (in Mb/s).
to all other nodes (in Mb/s).
[Integer > 0]
Table 4
MoCA Node Power Level Table
Field Name
Description
Possible Values
Rx Power (dBm)
Receive level from each other node to
the local node (in dBm).
the local node (in dBm).
[Integer < 0]
Path Loss (dBm)
Approximate loss from each node to
the local node (in dB).
the local node (in dB).
[Integer < 0]
Important:
Losses greater than 54 dB
an indicate a problem with the home
wiring.
wiring.
Table 5
MoCA Node Statistics Table Screen
Field Name
Description
Possible Values
NODE ID
Two-digit node ID number.
[Integer > 0]
NODE MAC
MAC address of the node.
[Hardware-dependent]
Unicast PHY Rate (Mbps) Tx
Transmit rate for the local node (in
Mb/s).
Mb/s).
[Integer > 0]
Note:
Preferred value is at least 180
Mb/s. Wait at least 30 seconds after
Link Up is achieved to verify.
Link Up is achieved to verify.
Unicast PHY Rate (Mbps) Rx
Receive rate for the local node (in
Mb/s).
Mb/s).
[Integer > 0]
Path Margin (dB)
Difference (in dB) between actual and
minimum acceptable signal strength.
minimum acceptable signal strength.
[Integer > 0]
N/A