Cisco Cisco Videoscape Voyager Vantage 3.2 사용자 가이드

      www.cisco.com

Accessing Vantage Diagnostic Screens

Introduction

This section explains how to gain access to the Vantage diagnostics using the buttons on either the set-top front panel 
(not available on all models) or the set-top remote control. It also explains how to identify diagnostic information, how to 
exit the diagnostics, and how to reboot the set-top.

Accessing Diagnostics Using the Set-Top Front Panel Buttons

 The following steps apply only to set-tops equipped with front panel buttons, such as the Cisco Explorer 4642 and 

Cisco Explorer 8642.

Follow these steps to access the Vantage diagnostic screens using the front panel buttons:

Press and hold the VOL+ and INFO buttons simultaneously for about 5 seconds.

The first diagnostic screen appears.

Press VOL+ (alone) to navigate to the next diagnostic screen. For the previous screen, press VOL-.

To enter a submenu of related screens (available if a + symbol precedes the screen title), press the SELECT key.

To browse within a menu, press the CH+ button for the next item, or the CH- button for the previous item.

To return to the previous menu, press the INFO button.

Accessing Diagnostics Using the Set-Top Remote Control

Follow these steps to access the diagnostic screens using the remote control:

Press and hold the EXIT key for about two seconds.

The POWER LED on the front panel of the set-top blinks.

In rapid succession, press the DOWN key twice, followed by the number 2.

A diagnostic screen appears.

To navigate to the next diagnostic screen, press the RIGHT ARROW key. To view the previous diagnostic screen, 
press the LEFT ARROW key.

To enter a submenu of related screens (available if a + symbol precedes the screen title), press the SELECT key.

To browse within a menu, press the DOWN ARROW key for the next item, or the UP ARROW key for the previous 
item.

To return to the previous menu, press the BACK/LAST key.