Cisco Headend System Release 2.7 릴리즈 노트
Appendix C
Direct ASI Installation and Configuration Procedures
166
4019475 Rev D
Restart the BFS and OSM Processes
You are now ready to restart the BFS and OSM processes, which you stopped earlier
in this appendix. Follow these instructions to restart the BFS and OSM processes.
in this appendix. Follow these instructions to restart the BFS and OSM processes.
Note: When you restart the BFS processes, the system rebuilds the PAT
Configuration table. It may take up to 10 minutes for the PAT Configuration table to
be rebuilt.
1 If necessary, open an xterm window on the DNCS.
2 Type dncsControl and then press Enter. The Dncs Control window opens.
3 Type 2 (for Startup / Shutdown Single Element Group) and then press Enter.
Configuration table. It may take up to 10 minutes for the PAT Configuration table to
be rebuilt.
1 If necessary, open an xterm window on the DNCS.
2 Type dncsControl and then press Enter. The Dncs Control window opens.
3 Type 2 (for Startup / Shutdown Single Element Group) and then press Enter.
The Dncs Control window updates to show all the servers and processes on the
DNCS.
DNCS.
4 Type the number associated with BFS Server and then press Enter. The Dncs
Control window updates to display a message prompting you to enter the target
status for the entire element group or to type E to display the individual
elements of the group.
status for the entire element group or to type E to display the individual
elements of the group.
5 Type 2 (for running) and then press Enter. A confirmation message appears.
6 Type y (for yes) and then press Enter. After a few moments, the Dncs Control
6 Type y (for yes) and then press Enter. After a few moments, the Dncs Control
window updates to display the current state (Curr Stt) of the selected group.
7 Wait until the current state of the BFS Server group is Running.
Note: The Dncs Control window updates automatically every few seconds or
you can press Enter to force an update.
you can press Enter to force an update.
8 When the current state of the BFS Server group is Running, type the number
associated with DNCS HCT Manager & OSM and then press Enter. The Dncs
Control window updates to display a message prompting you to enter the target
status for the entire element group or to type E to display the individual
elements of the group.
Control window updates to display a message prompting you to enter the target
status for the entire element group or to type E to display the individual
elements of the group.
9 Type e and then press Enter.
Note: The Dncs Control window updates to display the individual elements of
the DNCS HCT Manager & OSM group.
the DNCS HCT Manager & OSM group.
10 Type the number associated with /dvs/dncs/bin/OSM and then press Enter. The
Dncs Control window updates to display a message prompting you to enter the
target status of the selected element.
target status of the selected element.