Cisco Headend System Release 2.7 릴리즈 노트
Install the Service Pack
4019475 Rev D
71
6 Press Enter to continue. The system displays a message that asks whether you
have backed up the DNCS host and the DNCS database.
7 Have you backed up the DNCS file systems and database?
If yes, type y and then press Enter. The system displays a message to
configure the CED.in file. Continue to step 8.
configure the CED.in file. Continue to step 8.
If no, type n and then press Enter.
Note: If you type n, the installation will terminate. Back up the file systems
and database and then repeat this procedure from step 4.
Note: If you type n, the installation will terminate. Back up the file systems
and database and then repeat this procedure from step 4.
8 Choose one of the following options to configure dbOptimizer:
Enter the number of days passed, or type d (lower-case D) for the default
value of 90 days
value of 90 days
Press Enter to accept the default value
Note: You can determine the current setting by using the cat command to
examine the /dvs/dncs/bin/CED.in file.
examine the /dvs/dncs/bin/CED.in file.
9 Follow these instructions regarding the configuration parameters that are
displayed on the screen.
Example - Sample Installation Configuration Screen:
Example - Sample Installation Configuration Screen:
************************ Installation Configuration ************************
** **
** 0) INFORMIXSERVER = dncsDbServer **
** 1) DNCS_HOST = dncs **
** 2) BFS_HOST = dncs **
** 3) DNCSATM_IP = 10.253.0.1 **
** 4) APPSERVATM_IP = 10.253.0.10 **
** 5) DNCSTED_IP = 192.168.1.2 **
** **
****************************************************************************
Number to change ("0", "1", ...,"5"), "c" to continue, or "q" to quit:
Number to change ("0", "1", ...,"5"), "c" to continue, or "q" to quit:
a Examine the configuration parameters and follow onscreen instructions to
change any parameter that needs to be changed.
b Type c and then press Enter when you are finished. The installation
continues.
10 Type eject cdrom and then press Enter when the installation is complete.
11 Check the log file for errors.
11 Check the log file for errors.
Notes:
The installation log file is in the /dvs directory of the DNCS. The name of the
log file is install_SP.log.
log file is install_SP.log.
Call Cisco Services for assistance if the log file reveals errors.