Cisco Headend System Release 2.7 사용자 가이드
CableCARD Info Diagnostic Screens
78-4011047-01 Rev D
71
CableCARD Info Diagnostic Screens
Introduction
The CableCARD diagnostic screens, other than the first summary screen, are entirely
dependent on the manufacturer of the CableCARD module.
The host displays its own CableCARD summary information on the first summary
The host displays its own CableCARD summary information on the first summary
screen.
The host then pulls any subsequent CableCARD diagnostic screens from the
The host then pulls any subsequent CableCARD diagnostic screens from the
CableCARD module and displays them for your information. These screens are
dependent on the CableCARD manufacturer and are not included in this document.
If you are using Cisco M-Cards for your CableCARD modules, you can get detailed
If you are using Cisco M-Cards for your CableCARD modules, you can get detailed
information on these screens from M-Card and S-Card Diagnostic Screens on a TV Host:
A Reference Guide (part number 4015203).
Performing Tasks
By accessing this diagnostic screen, you can perform the following tasks:
Determine the CableCARD OOB mode
Determine the copy protection provisioning status
View the CableCARD, host, and manufacturer IDs
View the CableCARD MAC address, serial number, and software and hardware
versions