Cisco Headend System Release 2.7 설치 가이드
Stop the System Components
4023737 Rev C
117
Stop the System Components
Introduction
Use the procedures in this section to stop the Application Server and the DNCS.
Stopping the Application Server
Choose one of the following procedures based upon the resident application that
runs on your system:
runs on your system:
For sites that support the SA Resident Application, follow the instructions in
Stopping the Application Server at SARA Sites.
Stopping the Application Server at SARA Sites.
For sites that support the Aptiv resident application, follow the instructions in
Stopping the Application Server at Aptiv Sites.
Stopping the Application Server at Aptiv Sites.
Stopping the Application Server at SARA Sites
Complete these steps to stop the Application Server at sites that support the SA
Resident Application.
1 Press the middle mouse button on the Application Server and select App Serv
Resident Application.
1 Press the middle mouse button on the Application Server and select App Serv
Stop.
Note: Alternatively, you can complete this procedure from a remote shell on the
Application Server:
a In a DNCS xterm window, type rsh appserver and press Enter. This will
Note: Alternatively, you can complete this procedure from a remote shell on the
Application Server:
a In a DNCS xterm window, type rsh appserver and press Enter. This will
open a remote shell on the Application Server.
b Proceed to step 2 and run the commands from the remote shell.
2 From an xterm window on the Application Server, type appControl and then
press Enter. The Applications Control window appears.
3 Type 2 (for Startup/Shutdown Single Element Group), and then press Enter. The
system displays all Application Server processes.
Note: The system updates the display periodically, or you can press Enter to
force an update.
Note: The system updates the display periodically, or you can press Enter to
force an update.
4 When the Curr Stt (Current State) field of the Applications Control window
indicates that all of the Application Server processes have stopped, follow the
on-screen instructions to close the Applications Control window.
on-screen instructions to close the Applications Control window.