Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split 설치 가이드
4024770 Rev B
5
LCM to SM Upgrade Procedure
LCM to SM Upgrade Procedure
Upgrading the LCM to an SM
These upgrade instructions refer to the various sides of the LCM by the names
shown in the following illustration.
Complete the following steps to upgrade the Local Control Module to a Status
Monitor.
CAUTION:
To prevent electrostatic damage to electronic equipment, take ESD
To prevent electrostatic damage to electronic equipment, take ESD
precautions, including the use of an ESD wrist strap.
1 Remove the Local Control Module from the node.
2 Remove the eight screws that hold the cover on the LCM housing.
2 Remove the eight screws that hold the cover on the LCM housing.
Note: Six screws are on the right side and two screws are on the left side, as
shown in the following illustrations.