Cisco Cisco D9824 Advanced Multi Decryption Receiver 설치 가이드
About the Front Panel
78-4039426-01 Rev D
33
Front Panel LEDs
The functions of the LEDs are described in the table below.
LED
Signal
State/Color
State/Color
Explanation
ALARM
Red
Solid for five seconds indicates a Warning.
Red
Flashing indicates an Alarm.
SIGNAL
Green
Solid indicates all of the following conditions:
all RF inputs are enabled, all inputs are
locked to a signal, and are not muted.
locked to a signal, and are not muted.
all routed ASI outputs are operating
without an error.
without an error.
Green
Flashing indicates one of the following
conditions:
conditions:
difficulty with an input, route or output.
one or more RF inputs, or the ASI input
are not synchronized.
are not synchronized.
one or more ASI outputs are routed, but
muted by a fault condition.
muted by a fault condition.
no RF signal is present or detected, or it
is muted.
is muted.
receiver is not authorized to receive the
program.
program.
Off
Off indicates all of the following conditions:
no RF input signal is available, enabled
or detected, or the input is muted.
or detected, or the input is muted.
no ASI input is present
no valid inputs are available.