Cisco Cisco Aironet 1200 Access Point 설치 가이드

f. SNMP Community—If your network uses SNMP, enter the SNMP 

Community name provided by your network administrator and 
select the attributes of the SNMP data (also provided by your 
network administrator).

g. Role in Radio Network—Click the button that describes the role of 

the access point in your network. Select Access Point (Root) if your 
access point is connected to the wired LAN. Select Repeater 
(Non-Root) if it is not connected to the wired LAN. Select 
Workgroup Bridge if you desire the access point to become a 
workgroup bridge.

Configuring the access point as a workgroup bridge has 
restrictions. For more information, see the Cisco Aironet 1200 
Series Access Point Hardware Installation Guide.

h. Optimize Radio Network for—Use this setting to select either 

preconfigured or customized settings for the access point radio. 
Throughput optimizes the data volume handled by the access point 
but might reduce its range. Range maximizes range but might 
reduce throughput. Default uses the settings shipped from Cisco. 
Custom uses the settings you enter on the Network Interfaces: 
Radio-801.11b Settings page.