Cisco Cisco WAP571E Wireless-AC N Premium Dual Radio Outdoor Access Point 설치 가이드

The front panel of the devices consists of three lights: Power, WLAN, and 
LAN. For full descriptions of the colors of the lights and their indications, 
see 

.

A Kensington lock slot is found under the lights.

The back panel of the devices has an RJ-45 Ethernet port. Use the 
Ethernet port to power your device using PoE. It is an auto-sensing, 
Gigabit Ethernet (802.3) port used to connect your WAP devices to 
network devices, such as computers, routers, or switches. Cisco strongly 
recommends using Category 5e or better cable for Gigabit 
connectivity.

The side panel of the devices has a Reset button. See 

 for 

information on the Reset button.

If you are using a Cisco RV Series router, the default range for the DHCP 
assigned address is from 192.168.1.100 to 192.168.1.254. Any device 
connecting to the same LAN will be assigned an IP address in this range.

Username

cisco

Password

cisco

LAN IP Address

DHCP address assigned 
by server

Fallback LAN IP

192.168.1.245

Subnetwork Mask

255.255.255.0