Cisco Cisco IP Phone 8841 디자인 가이드
Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide
80
When Auto is selected for 2.4 GHz channels, only channels 1, 6, and 11 will be utilized.
Configure the access point transmit power level assignment method for either 5 or 2.4 GHz depending on which frequency band
is to be utilized.
Configure the access point transmit power level assignment method for either 5 or 2.4 GHz depending on which frequency band
is to be utilized.
Individual access points can be configured with static channel and transmit power for either 5 or 2.4 GHz radios, which may be
necessary if there is an intermittent interferer present in an area. While other access points can be enabled for Auto and work
around the access points that are have static channel assignments.
necessary if there is an intermittent interferer present in an area. While other access points can be enabled for Auto and work
around the access points that are have static channel assignments.
Note: Cisco Meraki access points do not support Dynamic Transmit Power Control (DTPC), therefore the Cisco Wireless IP
Phone 8821 and 8821-EX will utilize the maximum transmit power supported for the current channel and data rate.
Phone 8821 and 8821-EX will utilize the maximum transmit power supported for the current channel and data rate.
Traffic Shaping
On the Wireless > Configure > Firewall & traffic shaping page, traffic shaping rules can be defined.
To allow traffic shaping rules to be defined select Shape traffic on this SSID in the drop-down menu for Shape traffic.
Once Shape traffic on this SSID has been applied, then select Create a new rule to define Traffic shaping rules.
By default, Cisco Meraki access points currently tag voice frames marked with DSCP EF (46) as WMM UP 5 instead of WMM
UP 6 and call control frames marked with DSCP CS3 (24) as WMM UP 3 instead of WMM UP 4.
To allow traffic shaping rules to be defined select Shape traffic on this SSID in the drop-down menu for Shape traffic.
Once Shape traffic on this SSID has been applied, then select Create a new rule to define Traffic shaping rules.
By default, Cisco Meraki access points currently tag voice frames marked with DSCP EF (46) as WMM UP 5 instead of WMM
UP 6 and call control frames marked with DSCP CS3 (24) as WMM UP 3 instead of WMM UP 4.