Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cisco VCS
Cisco VCS Deployment Guide: Cisco VCS Expressway Starter Pack (X7.0)
Page 13 of 29
5. If appropriate, close any new window or tab that was opened to create this credential.
Configure bandwidths provisioned to Movi and other
endpoints (optional)
endpoints (optional)
The Cisco VCS can provision bandwidth limits to Movi clients and other endpoints. These are used to
configure the client with default values for it to use for incoming and outgoing bandwidth control.
configure the client with default values for it to use for incoming and outgoing bandwidth control.
1. Go to the
Provisioning
page (
Applications > Provisioning
).
2. Set Movi bandwidth to On.
a. Check and set the maximum incoming bandwidth for Movi to, for example, 512kbps.
b. Check and set the maximum outgoing bandwidth for Movi to, for example, 384kbps.
3. Enable bandwidth provisioning for other device types as required.
4. Set Movi ClearPath to On.
5. Click Save.
Note that VCS links and pipes can also be used for more advanced bandwidth control.