Cisco Cisco TelePresence Video Communication Server Expressway
Name
The credential name must be the same as the user account username – as indicated by the link
on the
on the
Create user account
and
Edit user account pages
.
It is also the same as the Jabber Video sign in username. All the usernames must match.
Note that from X7.1 and later, usernames are case insensitive.
Password
The password must be the same as the Jabber Video sign in password.
(Typically this is also the same as the user account password used for accessing FindMe
details.)
(Typically this is also the same as the user account password used for accessing FindMe
details.)
4. Click Create credential.
5. If appropriate, close any new window or tab that was opened to create this credential.
Configuring bandwidths provisioned to endpoints (optional)
The VCS can provision bandwidth limits to Jabber Video clients and other endpoints. This configures the
client with default values for it to use for incoming and outgoing bandwidth control.
client with default values for it to use for incoming and outgoing bandwidth control.
1. Go to
Applications > Provisioning
.
2. Set Movi bandwidth to On.
a. Check and set the maximum incoming bandwidth to, for example, 512kbps.
a. Check and set the maximum outgoing bandwidth to, for example, 384kbps.
3. Enable bandwidth provisioning for other device types as required.
4. Set Movi ClearPath to On.
5. Click Save.
Cisco TelePresence VCS Starter Pack Express Deployment Guide (X8.2)
Page 15 of 36
Configuring the VCS