Cisco Cisco TelePresence Video Communication Server Expressway
Enabling FindMe
FindMe must be enabled and configured for use.
1. Go to
Applications > FindMe
.
2. Configure the fields as follows:
FindMe
mode
mode
On
Caller ID
FindMe ID: the caller ID of a call being made through this VCS is replaced with the relevant
FindMe ID.
FindMe ID.
Restrict
users from
configuring
their
devices
users from
configuring
their
devices
Controls if users are restricted from adding, deleting or modifying their own devices. The
default is Off.
default is Off.
By default FindMe users are allowed to configure further devices in addition to any principal or
provisioned devices assigned to them by the system administrator. This setting can be used to
stop users from adding their own devices and restrict them to being able to only maintain their
locations and their associated devices.
provisioned devices assigned to them by the system administrator. This setting can be used to
stop users from adding their own devices and restrict them to being able to only maintain their
locations and their associated devices.
Device
creation
message
creation
message
Only visible when FindMe mode is On. The text entered here is displayed to users when they
add a device to their FindMe configuration. A limited set of HTML markup is supported in the
message which is previewed in the window at the bottom of the page when you click Save.
Refer to the online help for more information on the tags supported.
add a device to their FindMe configuration. A limited set of HTML markup is supported in the
message which is previewed in the window at the bottom of the page when you click Save.
Refer to the online help for more information on the tags supported.
An example message might be:
Phone numbers: use the prefix <b>9</b>
3. Click Save.
.
Configuring device authentication
You are recommended to use device authentication – verifying that endpoints can identify themselves with a
username and password known to the VCS.
username and password known to the VCS.
The VCS supports 3 different methods of verifying authentication credentials:
Cisco TelePresence VCS Starter Pack Express Deployment Guide (X8.2)
Page 7 of 36
Configuring the VCS