Cisco Cisco TelePresence Video Communication Server Expressway
Enabling calls between endpoints registered on CUCM
Cisco VCS Deployment Guide: CUCM v6.1, 7 and 8 with Cisco VCS X7 using a SIP trunk
Page 14 of 54
4. Click Save.
Add a phone device
1. Go to
Device > Phone
.
2. Click Add New.
3. Configure as required.
If BFCP is to be used, ensure that a SIP profile is used that has the “Allow Presentation Sharing
using BFCP” check box selected.
using BFCP” check box selected.
4. Click Save.
Alternatively, if there is already another phone configured, copy its configuration by selecting “super
copy”, entering the new phone’s MAC address and then changing the description (especially correct
the MAC address part of the description).
copy”, entering the new phone’s MAC address and then changing the description (especially correct
the MAC address part of the description).
Device directory number configuration
1. Go to
Device > Phone
.
2. Select the relevant device name.
3. On the left hand side, select a line.
4. Set up the required directory number (for this example use a 3xxx number).
Configure phone endpoint to pick up its configuration from CUCM
On the Cisco phone:
1. Press the settings button.