Cisco Cisco TelePresence Video Communication Server Expressway
Appendix 3 – Allow dialing to Cisco VCS domain from Cisco phones
Cisco VCS Deployment Guide: CUCM v6.1, 7 and 8 with Cisco VCS X7 using a SIP trunk
Page 35 of 54
Appendix 3 – Allow dialing to Cisco VCS
domain from Cisco phones
domain from Cisco phones
Configure a SIP route pattern that tells CUCM that anything with a domain vcs.domain needs to be
sent down the Cisco VCS SIP trunk
sent down the Cisco VCS SIP trunk
1. On CUCM, go to
Call Routing > SIP Route Pattern
.
2. Click Add New.
3. Configure the fields as follows:
Pattern Usage
Domain Routing
Pattern
Domain for calls, for example vcs.domain
Route Partition
(As set up in
System > Device Pool
)
SIP Trunk
Required Trunk to route calls to the Cisco VCS Control
4. Click Save.
When NNNN@vcs.domain is dialed by an endpoint registered to CUCM, CUCM will route the call to
the Cisco VCS as NNNN@<IP address of VCS>:5060 (TCP) or NNNN@<IP address of VCS>:5061
(TLS)
the Cisco VCS as NNNN@<IP address of VCS>:5060 (TCP) or NNNN@<IP address of VCS>:5061
(TLS)