Cisco Cisco TelePresence Video Communication Server Expressway
Appendix 12 – Enabling BFCP – Dual video/presentation sharing
Cisco VCS Deployment Guide: CUCM v6.1, 7 and 8 with Cisco VCS X7.1 using a SIP trunk
Page 52 of 53
Appendix 12 – Enabling BFCP – Dual
video/presentation sharing
video/presentation sharing
This requires CUCM version 8.6.1 or later.
VCS configuration
In Cisco VCS, go to the CUCM neighbor zone and:
1. Change the Advanced Zone profile from Cisco Unified Communications Manager to Custom.
2. Set the parameters as documented in “Appendix 8 – Parameters set by the ‘Cisco Unified
3. Ensure that SIP UDP/BFCP filter mode is set to Off.
CUCM configuration
In the SIP profile used by the SIP trunk to VCS, select “Allow Presentation Sharing using BFCP”
On CUCM
1. Go to
Device > Device Settings > SIP Profile
.
2. Select the check box by Allow Presentation Sharing using BFCP.
3. Click Save.
4. Click Apply Config.
5. Click OK.
You can now test BFCP operation.