Cisco Cisco TelePresence Video Communication Server Expressway
Enabling calls between endpoints registered on CUCM
Cisco VCS Deployment Guide: CUCM v6.1, 7 and 8 with Cisco VCS X5.1 using a SIP trunk
Page 14 of 50
Timer Register Expires
3600
Timer T1
500
Timer T2
Leave as default (typically 4000 or 5000)
Retry INVITE
6
Retry non-INVITE
10
Start Media Port
16384
Stop Media Port
32766
Call Pickup URI
x-cisco-serviceuri-pickup
Call Pickup Group Other URI
x-cisco-serviceuri-opickup
Call Pickup Group URI
x-cisco-serviceuri-gpickup
Meet Me Service URI
x-cisco-serviceuri-meetme
User Info
None
DTMF DB Level
Nominal
Call Hold Ring Back
Off
Anonymous Call Block
Off
Caller ID Blocking
Off
Do Not Disturb Control
User
Telnet Level for 7940 and 7960
Disabled
Timer Keep Alive Expires
120
Timer Subscribe Expires
120
Timer Subscribe Delta
5
Maximum Redirections
70
Off Hook To First Digit Timer
15000
Call Forward URI
x-cisco-serviceuri-cfwdall
Abbreviated Dial URI
x-cisco-serviceuri-abbrdial
Reroute Incoming Request to
new Trunk based on
new Trunk based on
Never
Add a phone device
1. Go to Device > Phone.
2. Click Add New.
3. Configure as required.
4. Click Save.
Alternatively, if there is already another phone configured, copy its configuration by selecting “super
copy”, entering the new phone’s MAC address and then changing the description (especially correct
the MAC address part of the description).
copy”, entering the new phone’s MAC address and then changing the description (especially correct
the MAC address part of the description).
Device directory number configuration
1. Go to Device > Phone.
2. Select the relevant device name.
3. On the left hand side, select a line.
4. Set up the required directory number (for this example use a 3xxx number).