Cisco Cisco TelePresence Video Communication Server Expressway
Enabling endpoints registered on CUCM to call endpoints registered on the Cisco VCS Control
Cisco VCS Deployment Guide: CUCM v6.1, 7 and 8 with Cisco VCS X5.1 using a SIP trunk
Page 24 of 50
Enabling endpoints registered on CUCM to call
endpoints registered on the Cisco VCS Control
endpoints registered on the Cisco VCS Control
Cisco VCS Control configuration
The configuration of the Cisco VCS Control needs 1 step:
Configure the Cisco VCS Control with a search rule that takes the incoming domain information
put on by CUCM (IP address of VCS:IP port) and converts it to the sip domain used by the
registered endpoints and routes the call to the Local Zone. The transform must expand a received
“short” 4 digit number to a full 11 digit phone number, as endpoints register with their full 11 digits.
put on by CUCM (IP address of VCS:IP port) and converts it to the sip domain used by the
registered endpoints and routes the call to the Local Zone. The transform must expand a received
“short” 4 digit number to a full 11 digit phone number, as endpoints register with their full 11 digits.
Set up a search rule for CUCM to call the Cisco VCS Local Zone
Note: The search rule must match and transform the URI received from CUCM
(0118912)?(4xxx@<ip address of vcs>:5060) into 01189124xxx@vcs.domain
(0118912)?(4xxx@<ip address of vcs>:5060) into 01189124xxx@vcs.domain
1. Go to VCS Configuration > Search rules > Rules.
2. Click New.
Cisco VCS Control
LOCAL ZONE
LOCAL ZONE
Local Video Endpoint
Subzone
Subzone
DNS
Zone
Zone
Traversal
Subzone
Subzone
Default
Subzone
Subzone
ENUM
Zone
Zone
Default
Zone
Zone
Neighbor
Zone