Cisco Cisco TelePresence Video Communication Server Expressway
Supplementary information
FindMe
When using Cisco TMSPE mode, the FindMe page will look as follows:
Integrating CUC with a VCS Cluster
Multiple VCS IP addresses can be added to a single Telephony Integration in CUC. To do this:
1.
Go to Telephony Integration > Port Group > [Select Port Group to be edited] > Edit Servers.
2.
Add a new SIP Server with appropriate details.
3.
Click Save.
Note that after adding a new SIP Server to the Port Group, the Port Group may need to be reset.
Message Waiting Indicator to Alphanumeric Extensions
The CUC sends the SIP NOTIFY message with MWI to the primary extension at the configured IP address or hostname
of the SIP Server, for example 53003@10.44.9.217
of the SIP Server, for example 53003@10.44.9.217
The VCS can use an ENUM zone to convert this extension back to an alphanumeric SIP URI, and therefore display the
MWI indicator on the appropriate E20 endpoint
MWI indicator on the appropriate E20 endpoint
See ENUM Dialing on VCS Deployment Guide for further information.
14
Cisco VCS CUC Voicemail Integration Deployment Guide