Cisco Cisco TelePresence Video Communication Server Expressway
Enabling calls between endpoints registered on Cisco VCS Controls in the video network
Cisco VCS Deployment Guide: Microsoft Lync 2010 and Cisco VCS X6.1
Page 15 of 81
If any links are missing, log onto the command line interface and execute the command:
xcommand DefaultLinksAdd
Lync Server configuration
No configuration is required on Lync Server to allow endpoints registered on the Cisco VCS Control to
call other endpoints registered on the Cisco VCS Control.
call other endpoints registered on the Cisco VCS Control.
Registering endpoints to the Video Network
Endpoint configuration.
For H.323, configure the endpoints as follows:
H.323 ID (for example, user2@VCS.domain)
H.323 Call Setup = Gatekeeper
Gatekeeper IP address = IP address of Cisco VCS Control
For SIP, configure the endpoints as follows:
SIP Address (URI) (for example, user1@VCS.domain)
Server Address (Proxy address) = IP address of Cisco VCS Control
Confirming registrations
Registration status can be confirmed on the Registrations page (Status > Registrations).
By default the Cisco VCS Control accepts all registrations to SIP domains configured in the Cisco VCS
Control. It is possible to limit registrations by explicitly allowing or denying individual registrations (see
the Cisco VCS Configuration section of the Cisco VCS Administrator Guide for further details).
Control. It is possible to limit registrations by explicitly allowing or denying individual registrations (see
the Cisco VCS Configuration section of the Cisco VCS Administrator Guide for further details).
Calls can now be made between endpoints registered on Cisco VCS Control.
Testing the configuration
To test the configuration:
1. Make some test calls between the endpoints.
2. Clear the calls.
3. Check the Call history page on the Cisco VCS Control (Status > Calls > History).