Cisco Cisco TelePresence Video Communication Server Expressway
OCS Relay configuration of “Lync Gateway” Cisco VCS(s)
Cisco VCS Deployment Guide: Microsoft Lync 2010 and Cisco VCS X6.1
Page 48 of 81
v.
Select the communication server pool to assign to the user.
vi. Select your preferred method to Generate user’s SIP URI.
vii. Select the user’s Telephony type.
•
This can be done in single command by CSPS using the command “enable-csuser”
For example:
enable-csuser -identity "test1" -registrarpool "lyncpool01.test-
customer.com" -sipaddress sip:user1@test-customer.com
customer.com" -sipaddress sip:user1@test-customer.com
“Lync gateway” Cisco VCS Configuration
The shared Cisco VCS / Lync Server domain test-customer.com is highlighted below so that it is
easy to see which entries need to be changed to the shared domain used in your installation.
easy to see which entries need to be changed to the shared domain used in your installation.
1. Go to the Option keys page (Maintenance > Option keys).
2. In the Software option section, in Add option key, enter the “User Policy” key
(116341U00-1-xxxxxxxx).
3. Click Add option.
4. Go to the FindMe configuration page (Applications > FindMe > Configuration).
a. Ensure FindMe mode is set to On.
b. Set Caller ID to FindMe ID.
5. Click Save.
6. Configure Cisco VCS to be authoritative for the Lync Server domain so that FindMe™ users with
that domain can be handled by this Cisco VCS and registered as Lync devices to Lync Server.
Go to the Domains page (VCS Configuration > Protocols > SIP > Domains).
Go to the Domains page (VCS Configuration > Protocols > SIP > Domains).
7. Click New.
8. In Name enter the domain shared with Lync Server (for example, test-customer.com).
9. Click Create domain.
10. Go to the SIP page (VCS configuration > Protocols > SIP > Configuration).
11. Set SIP registration proxy mode to Proxy to known only.
12. Click Save.
Note: If SIP registration proxy mode is already configured as Proxy to any, this is also suitable.