Cisco Cisco TelePresence Video Communication Server Expressway
Cisco VCS setup for CUC integration
Cisco VCS Deployment Guide: VCS and Cisco Unity Connection voicemail integration
Page 5 of 18
Cisco VCS setup for CUC integration
Configuration of the VCS Control to enable calls to be made to the CUC Voicemail Server can be
broken down into the following steps:
broken down into the following steps:
create a neighbor zone to link to the CUC server
add a search rule so that calls can be routed to voicemail
Create a neighbor zone to the CUC server:
1. Go to
VCS configuration > Zones
.
2. Click New.
3. Configure the fields as follows:
Name
Enter the name you want to give this zone, for example “CUC”
Type
Select Neighbor
Hop count
Leave as default setting
H.323 mode
Select Off
SIP mode
Select On
SIP port
Enter 5060
Transport
Select TCP
Accept proxied
registrations
registrations
Select Allow
Authentication policy
Leave as default setting
SIP authentication
trust mode
trust mode
Leave as default setting
Location
Enter the IP address or FQDN of the CUC server
Zone profile
Select Cisco Unified Communication Manager
4. Click Create zone.