Cisco Cisco TelePresence Video Communication Server Expressway
a. Go to
Users > FindMe accounts
.
(If you are using Cisco TMSPE you must set up the accounts via Cisco TMS instead.)
b. Click New.
c. Configure the following fields:
c. Configure the following fields:
Username
Username used by the FindMe user to log in to VCS to administer this account.
Display name
Full name of this user.
Phone number
E164 number to use when outdialing to a gateway.
FindMe ID
URI with Lync’s domain that will register to Lync Server as though it were a Lync
client.
client.
Principal device
address
address
Routable endpoint URI / E164 or H.323 ID to call when this FindMe is called.
Initial password
and Confirm
password
and Confirm
password
Password needed by the FindMe user to log in to VCS to administer this account.
(Not configurable if VCS is configured with User authentication source as Remote.)
(Not configurable if VCS is configured with User authentication source as Remote.)
FindMe type
Individual
4. Ensure that the domain shared with the Lync is resolvable by the DNS server; this is usually best
Configuring Lync Active Directory for FindMe users
Ensure that Active Directory user accounts exist for all FindMe accounts on the “Lync gateway” VCS(s) that
will register to Lync Server (FindMe accounts that have the same domain as Lync).
will register to Lync Server (FindMe accounts that have the same domain as Lync).
On the PC running the Active Directory for Lync users:
1. Select
Start > Control Panel > Administrative Tools > Active Directory Users and Computers
.
or
Start > All Programs > Administrative Tools > Active Directory Users and Computers
.
2. Select the ‘Users’ folder under the required domain:
Cisco TelePresence Microsoft Lync and Cisco VCS Deployment Guide (X8.5)
Page 50 of 83
Using FindMe for enhanced deployments