Cisco Cisco TelePresence Video Communication Server Expressway
Appendix 2: Extended Deployment Using FindMe
You can optionally extend the deployment described in this guide by configuring your video network deployment to
use FindMe. This provides richer presence and a more integrated environment. It uses the example deployment
depicted below:
use FindMe. This provides richer presence and a more integrated environment. It uses the example deployment
depicted below:
Deployment Information
This deployment configuration consists of:
■
FindMe accounts (also known as FindMe users) on the Gateway VCS that use the Lync network's domain
(example.com in this example). The B2BUA registers these FindMe accounts into Lync so that Lync sees them
as though they were Lync client registrations, for example:
(example.com in this example). The B2BUA registers these FindMe accounts into Lync so that Lync sees them
as though they were Lync client registrations, for example:
—
David with a URI david.jones@example.com, containing devices david.jones.office@video.example.com
and david.jones.home@video.example.com
and david.jones.home@video.example.com
—
Alice with a URI alice.parkes@example.com, containing devices alice.parkes.office@video.example.com
and alice.parkes.home@video.example.com
and alice.parkes.home@video.example.com
These FindMe accounts specify single or multiple endpoints as primary devices to call; the primary devices
can be located anywhere in the video network or anywhere accessible via the video network.
can be located anywhere in the video network or anywhere accessible via the video network.
58
Cisco VCS and Microsoft Lync Deployment Guide