Cisco Cisco TelePresence Video Communication Server Expressway
Check that calls between Lync clients registered
on Lync Server operate as expected
on Lync Server operate as expected
The configuration described in this section should already be in place and operational.
VCS Control configuration
No configuration is required on VCS Control for endpoints registered on Lync to call other endpoints
registered on Lync Server.
registered on Lync Server.
Enabling users for Lync
By default, Active Directory users are not Lync enabled. Check that users required to support Lync are
enabled to do so, and if not enable them. This can be done both by Lync Server Control Panel or through
Windows PowerShell commands (using Lync 2010 as an example):
enabled to do so, and if not enable them. This can be done both by Lync Server Control Panel or through
Windows PowerShell commands (using Lync 2010 as an example):
1. Bring up the Lync Server Control Panel (either from the start menu select Lync Server Control Panel, or if
there is a desktop icon double click it).
2. On Lync Server Control Panel go to the
Users
menu: you can see users already enabled for
communication server.
To add a new user:
1. Select
Enable users
and click Add.
2. Search for and select the user (in this example, David Jones)
Note: to find the user it must already have been defined in Active Directory.
Cisco TelePresence Microsoft Lync and Cisco VCS Deployment Guide (X8.2)
Page 17 of 80
Check that calls between Lync clients registered on Lync Server operate as expected