Cisco Cisco TelePresence Video Communication Server Expressway
Setting up search rules to route calls with video network domains to the
video network
video network
Note that in small test and demo networks, this step is not necessary as the video network VCS Control is
the “Lync gateway” VCS.
the “Lync gateway” VCS.
1. Go to
Configuration > Dial plan > Search rules
.
2. Click New.
3. Configure the following fields:
4. Configure the search rule to match the domain supported in the video network:
Rule name
An appropriate name, for example “Route to Video network”
Priority
Leave as default, for example 100
Source
Any
Mode
Alias pattern match
Pattern type
Regex
Pattern string
Anything in the video network domain, for example .+@vc\.ciscotp\.com.*
Pattern behavior
Leave
On successful match
Continue
Target zone
Select the video network zone, for example “To Video network”
5. Click Save.
6. Repeat these steps to add a rule for each video network domain, including the mcu domain (for example,
.+@mcu.ciscotp.com).
Cisco TelePresence Microsoft Lync and Cisco VCS Deployment Guide (X8.2)
Page 37 of 80
Enabling Lync clients registered on Lync Server to call endpoints registered on the video network