Cisco Cisco TelePresence Video Communication Server Expressway
Registering video endpoints to the video network
Video endpoint configuration
For H.323, configure the endpoints as follows:
n
H.323 ID (for example, david.jones.office@vc.ciscotp.com)
n
H.323 Call Setup Mode = Gatekeeper
n
Gatekeeper IP address = IP address or FQDN of VCS Control (cluster)
For SIP, configure the endpoints as follows:
n
SIP Address (URI) (for example, alice.parkes.office@vc.ciscotp.com)
n
Server Address (Proxy address) = IP address or FQDN of VCS Control (cluster)
Confirming registrations
Registration status can be confirmed on the
Registrations
page (
Status > Registrations
).
By default the VCS Control accepts all registrations to SIP domains configured in the VCS Control. You can
limit registrations by explicitly allowing or denying individual registrations (see VCS Administrator Guide for
further details).
limit registrations by explicitly allowing or denying individual registrations (see VCS Administrator Guide for
further details).
Calls can now be made between endpoints registered on VCS Control.
Testing the configuration
To test the configuration:
1. Make some test calls between the endpoints.
2. Clear the calls.
3. Check the
Call history
page on the VCS Control (
Status > Calls > History
).
Microsoft Lync and Cisco VCS Deployment Guide (X8.1)
Page 16 of 76
Video network: check that calls between endpoints registered to VCS Controls operate as expected