Cisco Cisco TelePresence Video Communication Server Expressway
Enabling endpoints registered on the video network to call MOC/Lync clients registered on OCS/Lync
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Lync 2010 and Cisco VCS X7.1
Page 36 of 104
“OCS/Lync gateway”: Set up the SIP domain of the “OCS/Lync
gateway” VCS
gateway” VCS
B2BUA registered FindMe users need the “OCS/Lync gateway” VCS be authoritative for the
OCS/Lync server’s shared domain.
OCS/Lync server’s shared domain.
1. Go to the
Domains
page (
VCS configuration > Protocols > SIP > Domains
).
2. Click New.
3. Set Name to ciscotp.com.
4. Click Create domain.
“OCS/Lync gateway”: Configure DNS and local hostname
Configure the DNS server details
The “OCS/Lync gateway” VCS(s) should be configured to use the same DNS server(s) as OCS/Lync
server.
server.
On a machine running OCS/Lync server:
1. From the Windows
Start
menu choose
Run
.
2. Type
cmd
into the Open field and click OK. A command window opens.
3. In the cmd.exe window type:
ipconfig /all
4. Note down the DNS server(s).
Note: if the DNS server IP address is 127.0.0.1 that means that OCS/Lync server is using a DNS
server on its own hardware. Instead of entering 127.0.0.1 on the Cisco VCS, use the IP address of
the OCS/Lync server platform instead.
server on its own hardware. Instead of entering 127.0.0.1 on the Cisco VCS, use the IP address of
the OCS/Lync server platform instead.
On each “OCS/Lync gateway” VCS Control peer:
1. Go to the
DNS
page (
System > DNS
).