Cisco Cisco TelePresence Video Communication Server Expressway
Enabling endpoints registered on the video network to call MOC clients registered on OCS
Set up a search rule to route calls with the OCS domain to the “OCS
gateway” Cisco VCS (cluster).
gateway” Cisco VCS (cluster).
1. Go to the Rules page (VCS Configuration > Search rules > Rules).
2. Click
New.
3. Configure the following fields:
Rule name
An appropriate name, for example “Route to OCS gateway”
Zone name
Select the OCS gateway zone, for example “To OCS gateway”
4. Click
Create rule.
5. Configure the following fields:
Rule name
Leave as set above
Priority
Leave as default, for example 100
Source Any
Mode AliasPatterMatch
Pattern type
Regex
Pattern string
.*@test-customer.com.*
Pattern behavior
Leave
On successful match
Continue
Target zone
Leave as set above
6. Click
Save.
“OCS gateway” Cisco VCS Control configuration (1)
If “OCS gateway” is a cluster, unless this guide states that configuration is required on each peer,
configure the Master Cisco VCS in the cluster and allow the configuration to be replicated to the
other peers automatically.
configure the Master Cisco VCS in the cluster and allow the configuration to be replicated to the
other peers automatically.
If the “OCS gateway” is just a single Cisco VCS then set up the configuration on that Cisco VCS.
It is recommended to use TLS connectivity between Cisco VCS and OCS, but TCP connection is also
explained. (TCP may not work for OCS configurations that include HLBs and / or OCS Director).
explained. (TCP may not work for OCS configurations that include HLBs and / or OCS Director).
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2
Page 28 of 92