Cisco Cisco TelePresence Video Communication Server Expressway
Appendix 11 – Endpoint specific configuration
Appendix 11 – Endpoint specific configuration
T150
Use code version L5.1 or greater.
Set Network > SIP Settings > Server Type to Auto (not Microsoft).
For versions prior to L6.0 set Security > Encryption to Off
MXP 1000, MXP 1700 and MXP 6000
Use code version F7.0 or greater.
Set Network > LAN Settings > SIP Settings > SIP Server Settings > Server Type to Auto (not
Microsoft).
Microsoft).
C20, C60 and C90 (including T1 and T3 systems)
Use code version TC2.0.0 or greater .
Set Advanced configuration > SIP > Profile 1 > Type to Standard (not Microsoft).
For versions up to and including 2.1.0 set Encryption = Off (not Best effort).
E20
Use code version TE2.0.0 or greater.
Set Advanced configuration > SIP > Profile 1 > Type to Standard (not Microsoft).
Cisco TelePresence Movi
Movi 2
Movi 2 only supports H.264 video – MOC Clients do not support H.264; Movi can only make a video
call to a MOC client if an IP gateway or an MCU is used to transcode between H.263 and H.264
media.
call to a MOC client if an IP gateway or an MCU is used to transcode between H.263 and H.264
media.
Movi 3
Movi 3 supports H.263 – as supporthed by OCS. No special configuration is required.
Cisco TelePresence IP GW
Use code version greater than 2.0(1.2).
Set SIP Registrar type to Standard SIP (not Microsoft OCS/LCS).
Cisco TelePresence ISDN gateway
Use code version 1.5 or greater.
ISDN gateway is H.323 only and so calls between the gateway and OCS will be interworked by
Cisco VCS.
Cisco VCS.
Cisco VCS Deployment Guide: Microsoft OCS 2007 R1 and R2 and Cisco VCS X5.2
Page 83 of 92