Cisco Cisco TelePresence Video Communication Server Expressway
Video network: Enabling calls between endpoints registered on Cisco VCS Controls in the video network
Cisco VCS Deployment Guide: Microsoft OCS 2007 R2, Lync 2010 and Cisco VCS X7.0
Page 20 of 104
For SIP, configure the endpoints as follows:
SIP Address (URI) (for example, alice.parkes.office@vc.ciscotp.com)
Server Address (Proxy address) = IP address or FQDN of Cisco VCS Control (cluster)
Confirming registrations
Registration status can be confirmed on the Registrations page (Status > Registrations).
By default the VCS Control accepts all registrations to SIP domains configured in the VCS Control. It
is possible to limit registrations by explicitly allowing or denying individual registrations (see the VCS
Configuration section of VCS Administrator Guide for further details).
is possible to limit registrations by explicitly allowing or denying individual registrations (see the VCS
Configuration section of VCS Administrator Guide for further details).
Calls can now be made between endpoints registered on Cisco VCS Control.
Testing the configuration
To test the configuration:
1. Make some test calls between the endpoints.
2. Clear the calls.
3. Check the
Call history
page on the VCS Control (
Status > Call history
).